|
Typical RF System Equipment
|
VP-7611R
Receiver
 |
Each of the sensor models we offer can be supplied with a high power RF transmitter. Each of these model numbers end with "10". The VP-5210, VP-7410 etc. are examples of these part numbers. These units detect a person lighting up and transmit a coded signal to the VP-7611R Receiver. The receiver can be paired with
our VP-P615T paging transmitter shown below. Click here for a typical school system.
|
|
Click on the photo above
for a larger image. |
|
VP-FA570
Signal Repeater |
Our long range system sometimes requires a signal repeater. In open air the long range sensors can transmit up to about 1000' but when encumbered by concrete walls and other obstacles signal range can be diminished. The VP-FA570 solves this challenge by repeating signals it receives wirelessly and re-transmits them to the VP-7611R Receiver above.
-
6.5" x 3.5" x 1.0"
-
Environment 32 to 140 deg F. (indoor only)
up to 90% relative humidity, non-condensing.
-
900 MHz
-
14 VAC (Transformer Included)
|
|
Click on the photo above
for a larger image. |
|
VP-P615T
Paging Transmitter
 |
The paging transmitter (VP-P615T) shown on to the left is connected to the VP-7611R receiver above and transmits to pagers worn by your staff. The pager receives a signal from the paging transmitter and displays the sensor number (bathroom, or other monitored area) buzzes and alerts the wearer that someone is lighting up! This unit
is a transmitter only. Belt Pagers VP-P615R must
be ordered separately. Most institutions require
at least two VP-P615R (Belt Pagers) for their
male and female staff.
-
Powerful 27 MHz Transmitter
-
Up to 1.4 Mile range
-
Includes brackets for optional wall mounting.
-
Comes complete with one VP-P615R
|
|
Click on the photo above
for a larger image. |
|
VP-P615R
 |
Belt
Pager. (Works with VPP615T)
Beeps when triggered. Displays code of the
sensor transmitting the alarm/event. |
|
VP-R630 (RF)
VP-R640 (Wired)
 |
The VP-R630 horn pictured on the left
can be paired with the VP-5230, VP-7430, VP-7630, VP-7730, VP-7830 or VP-7930. This item can be mounted up to about
50' from the sensor(s) it is paired with. When someone lights up an alarm is transmitted wirelessly to the horn receiver.The VP-R640 Wired Horn pictured on the left
can be paired with the VP-5240, VP-7440, VP-7640, VP-7740, VP-7840 or VP-7940.
-
Horn unit shown is mounted on a 4.5" x 4.5" plastic box (not shown) which houses the receiver unit.
-
15 Watt power rating.
-
Rust free housing
-
800/1200 HZ Warble Sound 85 dB at 10'
-
Supplied with 110V/60Hz to 12 vdc power supply.
|
|
VP-R730 (RF)
VP-R740 (Wired)
 |
The VP-R730 strobe pictured on the left
can be paired with the VP-5230, VP-7430, VP-7630, VP-7730, VP-7830 or VP-7930. This item can be mounted up to about
50' from the sensor(s) it is paired with. When someone lights up the alarm is transmitted wirelessly to the Strobe receiver.The VP-R740 (Wired) Strobe pictured on the left
can be paired with the VP-5240, VP-7440, VP-7640, VP-7740, VP-7840 or VP-7940.
-
Ideally suited for a quiet office environment or perhaps a nurses station in a convalescent facility or nursing home.
-
Strobe unit is mounted on a 4.5" x 4.5" plastic box (not shown) which houses the receiver unit.
-
Rust free housing
-
60,000 Candle Power Strobe
-
Supplied with 110V/60Hz to 12 vdc power supply.
|
|
VP-R830B (RF)
VP-R840B (Wired)
 |
The VP-R830B Horn-Strobe
on the left can paired with the VP-5230, VP-7430, VP-7630, VP-7730, VP-7830,
VP-7930 or
VP-8040. This item can be mounted up to about
50' from the sensor(s) it is paired with. When someone lights up the alarm is transmitted wirelessly to the Horn/Strobe receiver. The VP-R840B (Wired) Horn/Strobe pictured on the left
can be paired with the VP-5240, VP-7440, VP-7640, VP-7740, VP-7840, VP-7940
or
VP-8040.
The Wireless (830B)
Horn Strobe can be mounted up to 50' from
detector. Use with detector model xx30.
Simply mount and plug in to install.
The Wired (840B)
Horn/Strobe can be mounted up to 5000' from
detector. Use with detector model xx40. Run
wires between units to install.
- Piercing 85-95 dB
sound output (85 wireless; 95 wired)
- Can be heard over
heavy machinery
- 10 high intensity
LEDs
- Sounds/flashes for
20 seconds and then resets
- Supplied with
110V/60Hz to 12 VDC power supply.
- Durable
polycarbonate construction
- Tamper switch
sounds alarm when touched
- For indoor use
only
|
|
VP-R930 (RF)
 |
The VP-R930
Chime-Strobe (Wireless Only)
on the left can paired with the VP-5230, VP-7430, VP-7630, VP-7730, VP-7830 or VP-7930. This item can be mounted up to about
50' from the sensor(s) it is paired with. When someone lights up the alarm is transmitted wirelessly to the Horn/Strobe receiver.
|
|
